copper sand cast alloy uns c85500

  • Copper.org - C85500 Alloy

    Specific Gravity. 8.41. Electrical Conductivity % IACS at 68°F. 26. Thermal Conductivity Btu/ sq ft/ ft hr/ °F at 68°F. 67. Coefficient of Thermal Expansion 68-212 10 to -6 power per °F (68 – 212°F) 11.8. Specific Heat Capacity Btu/ lb /°F at 68°F.

  • UNS C85500, Copper Casting Alloy - MatWeb

    UNS C85500, Copper Casting Alloy, Casting methods recommended for this alloy: Centrifugal and Sand. Applications: Ornamental castings. Classified under: Yellow brasses and leaded yellow brasses As cast values below are for sand casting.

  • eFunda: Properties of Copper Alloy UNS C85500

    Materials » Alloys » Copper Alloy » Cast » UNS C83600 Materials » Alloys » Copper Alloy » Wire » AWG-13 Materials » Alloys » Copper Alloy » Wrought » UNS C22000

  • UNS C84500, Copper Casting Alloy

    As cast values below are for sand casting. Alloy does not respond to heat treating: ... Copper Casting Alloy UNS C85500, Copper Casting Alloy Leaded Yellow Brass, UNS C85700, Copper Casting Alloy, Sand and Centrifugal Castings Leaded Yellow Brass, UNS C85800, Copper Casting Alloy, Die Castings MCUDAZ / 11905.

  • Cast copper alloy C85500 (Yellow Brass) [SubsTech]

    2012-6-2 · cast_copper_alloy_c85500_yellow_brass.txt · Last modified: 2012/06/02 by dmitri_kopeliovich Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License

  • Copper Sand Cast Alloy (UNS C87500) – Mechanical

    UNS C87500 copper alloy has a copper content of not less than 79%. The following table shows the mechanical properties of UNS C87500 sand cast alloy as a function of heat treatment. Elong. The chemical composition of UNS C87500 copper alloy is outlined in the following table. Equivalent materials to UNS C87500 copper alloy include:

  • Materials: Metal Alloys: Properties

    Materials » Alloys » Copper Alloy » Cast » UNS C85500 Materials » Alloys » Steel » Alloy Steel » AISI 8630 Beams » Simply Supported » Uniformly Distributed Load » Single Span » Aluminum I Beam » 12.00 × 11.672

  • Copper Sand Cast Alloy (UNS C95500) - Mechanical

    UNS C95500 has a copper content of not less than 78%. Tabulated below are the mechanical properties of UNS C95500 sand cast alloy as a function of heat treatment. Elong. The chemical composition of UNS C95500 copper alloy is outlined in the following table. Equivalent materials to UNS C95500 copper alloy are given in the table below.

  • Copper Sand Cast Alloy (UNS C84400) - Mechanical

    Copper Sand Cast Alloy (UNS C84400) - Mechanical Properties. Copper UNS C84400 has a copper content of not less than 78%. The following table shows the mechanical properties of UNS C84400 sand cast alloy as a function of heat treatment. Elong. Equivalent materials to UNS C84400 copper alloy are the following:

  • Copper Sand Cast Alloy (UNS C83600) - Mechanical

    Copper UNS C83600 has a copper content of not less than 84%. The following table shows the mechanical properties of UNS C83600 sand cast alloy as a function of heat treatment. Temper. Tensile Str. Yield Str.

  • China Brass casting C83800, C83600, C84500, C85500,

    2021-9-3 · Application: Cast beryllium bronze is mainly used as explosion-proof tools, moulds, structural parts of submarine cable repeaters, welding electrodes, etc. Cast tin bronze, cast aluminum bronze and cast brass are mainly used for bearing bush, sleeve, Bush, bearing, gear and pipe fittings. Casting copper alloy is widely used in Arts and crafts

  • Cast copper alloy C85500 (Yellow Brass) [SubsTech]

    2012-6-2 · cast_copper_alloy_c85500_yellow_brass.txt · Last modified: 2012/06/02 by dmitri_kopeliovich Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License

  • UNS C84500, Copper Casting Alloy

    As cast values below are for sand casting. Alloy does not respond to heat treating: ... Copper Casting Alloy UNS C85500, Copper Casting Alloy Leaded Yellow Brass, UNS C85700, Copper Casting Alloy, Sand and Centrifugal Castings Leaded Yellow Brass, UNS C85800, Copper Casting Alloy, Die Castings MCUDAZ / 11905.

  • Advanced Search for Wrought and Cast Copper Alloys ...

    Alloy UNS# Designation Active View; C85200 Leaded Yellow Brass Yes C85200 Profile Suppliers of C85200: C85300 Yellow Brass No C85300 Profile Suppliers of C85300: C85400 No.1 Yellow Brass Yes C85400 Profile Suppliers of C85400: C85500 Yes C85500 Profile Suppliers of C85500 * signifies an alloy registered with the U.S. EPA as Antimicrobial.

  • Copper Sand Cast Alloy (UNS C83600) - Mechanical

    Copper UNS C83600 has a copper content of not less than 84%. The following table shows the mechanical properties of UNS C83600 sand cast alloy as a function of heat treatment. Temper. Tensile Str. Yield Str.

  • Copper.org - C95500 Alloy

    Mechanical Properties *; Form Temper Temper Code Tensile Strength (ksi) YS-0.5% Ext (ksi) Elongation (%) Rockwell B scale Brinell Hardness, 3000 kg load Shear Strength (ksi) Izod (ft-lbs) Charpy V-Notch Impact Strength (ft-lbs) Compressive Strength .1 in. set/in. (ksi) Creep Strength (0.1% per 10,000 hours) (ksi) Fatigue Strength** (ksi) Proportional Limit (ksi) * Measured at

  • Copper.org - C99500 Alloy

    Brinell Hardness, 3000 kg load. Proportional Limit. (ksi) * Measured at room temperature, 68°F (20°C). As Sand Cast. As Sand Cast. M01. 70 Min for Standard. 40 Min for Standard.

  • Aluminum Foundry Products - NIST

    2016-4-4 · Aluminum-copper alloys that contain 4 to 5% Cu, with the usual impurities iron and silicon and sometimes with small amounts of magnesium, are heat treatable and can reach quite high strengths and ductilities, es- pecially if prepared from ingot containing less than 0.15% Fe. The aluminum-copper alloys are single-phase alloys.

  • MICROSTRUCTURE OF ALLOYS* - NIST

    2016-4-4 · principal alloy elements. Each class represents a different type of micro­ structure because of these alloy differences. Typical microstructural fea­ tures are described in this chapter for each class and show how micro­ structure progressively develops from the as-cast ingot to the final wrought form.

  • Copper.org - C81100 Alloy

    Mechanical Properties *; Form Temper Temper Code Tensile Strength (ksi) YS-0.5% Ext (ksi) Elongation (%) Brinell Hardness, 500 kg load Fatigue Strength** (ksi) * Measured at room temperature, 68°F (20°C).

  • Cast copper alloy C85500 (Yellow Brass) [SubsTech]

    2012-6-2 · cast_copper_alloy_c85500_yellow_brass.txt · Last modified: 2012/06/02 by dmitri_kopeliovich Except where otherwise noted, this work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 3.0 License

  • Advanced Search for Wrought and Cast Copper Alloys ...

    Alloy UNS# Designation Active View; C85200 Leaded Yellow Brass Yes C85200 Profile Suppliers of C85200: C85300 Yellow Brass No C85300 Profile Suppliers of C85300: C85400 No.1 Yellow Brass Yes C85400 Profile Suppliers of C85400: C85500 Yes C85500 Profile Suppliers of C85500 * signifies an alloy registered with the U.S. EPA as Antimicrobial.

  • Cast Copper Alloys: Brasses (C83300 - C89999)

    UNS Home; Brasses (C83300 - C89999) Cast Copper Alloys: Brasses (C83300 - C89999) Standard Designation for Cast Copper Alloys. C83300-C83999: Copper-Tin-Zinc and Copper-Tin-Zinc-Lead Alloys (Red and Leaded Red Brasses); C84000-C84999: Copper-Tin-Zinc and Copper-Tin-Zinc-Lead Alloys (Semi-Red and Leaded Semi-Red Brasses); C85000-C85999: Copper

  • Properties of Wrought and Cast Copper Alloys: Copper ...

    Copper Alloys Search - Basic. Select the alloy (s) and one or more properties you would like to see displayed. * = alloys registered with U.S. EPA as antimicrobial. Laboratory testing shows that, when cleaned regularly, EPA-registered antimicrobial copper alloy surfaces kill greater than 99.9% of the following bacteria within 2 hours of ...

  • Standards & Properties: Mechanical Properties of Copper ...

    2022-1-2 · Only the sand cast alloy was brittle at low temperature. For most alloys the tensile strength, yield strength, elongation and notch tensile strength increased in the temperature range from 295 to 20 K. Ultimate and yield strengths of most

  • Copper.org - C99500 Alloy

    Brinell Hardness, 3000 kg load. Proportional Limit. (ksi) * Measured at room temperature, 68°F (20°C). As Sand Cast. As Sand Cast. M01. 70 Min for Standard. 40 Min for Standard.

  • Aluminum-Silicon Bronze, UNS C95600, Copper Casting

    Casting methods recommended for this alloy: Centrifugal, Continuous, Permanent Mold, Plaster, and Sand. Applications: Cable connectors, terminals, valve stems, marine hardware, gears, worms, pole-line hardware. Classified under: Aluminum bronzes. Data typical for as-sand-cast separately cast test bars (M01 temper). Alloy does not respond to ...

  • Properties of some metals and alloys - Nickel Institute

    and alloys • monel* nickel-copper alloys • incoloy* nickel-iron-chromium alloys • inconel* nickel-chromium-iron alloys • nimonic* nickel-chromium alloys • hastelloy* alloys • chlorimet* alloys • illium* alloys • high temperature-high strength alloys • iron and steel alloys • cast iron alloys • wrought stainless steel • cast

  • MICROSTRUCTURE OF ALLOYS* - NIST

    2016-4-4 · principal alloy elements. Each class represents a different type of micro­ structure because of these alloy differences. Typical microstructural fea­ tures are described in this chapter for each class and show how micro­ structure progressively develops from the as-cast ingot to the final wrought form.

  • Copper.org - C81100 Alloy

    Mechanical Properties *; Form Temper Temper Code Tensile Strength (ksi) YS-0.5% Ext (ksi) Elongation (%) Brinell Hardness, 500 kg load Fatigue Strength** (ksi) * Measured at room temperature, 68°F (20°C).